Hello All,
Well, the subject line pretty much says it all for me. I can't use the QBX command SHELL "dir/on c:>proglist.dir" running MS-DOS 7.10. Is there some resolve for this behavior or do I need to back up and install DOS 6.22?
Thanks for reading,
John
QBASIC DOS Shell in MS-DOS 7.10 results in Illegal Function
- burger2227
- Veteran
- Posts: 2466
- Joined: Mon Aug 21, 2006 12:40 am
- Location: Pittsburgh, PA
Re: QBASIC DOS Shell in MS-DOS 7.10 results in Illegal Funct
QB64 worked using: SHELL _HIDE "dir/on c:>proglist.dir"
Even without proper spacing. Try spaces between dir /on C: > proglist.dir
Even without proper spacing. Try spaces between dir /on C: > proglist.dir
Please acknowledge and thank members who answer your questions!
QB64 is a FREE QBasic compiler for WIN, MAC(OSX) and LINUX : https://www.qb64.org/forum/index.php
Get my Q-Basics demonstrator: https://www.dropbox.com/s/fdmgp91d6h8ps ... s.zip?dl=0
QB64 is a FREE QBasic compiler for WIN, MAC(OSX) and LINUX : https://www.qb64.org/forum/index.php
Get my Q-Basics demonstrator: https://www.dropbox.com/s/fdmgp91d6h8ps ... s.zip?dl=0
Re: QBASIC DOS Shell in MS-DOS 7.10 results in Illegal Funct
If this should help someone down the road...
I figured out the problem with DOS 7.10. I performed the installation with the drive volumes unlocked. If you are using QBX which knows nothing about long file names, you must install it with the volumes LOCKED if you want to perform commands like the prior example. It's working just fine now after that correction.
John
I figured out the problem with DOS 7.10. I performed the installation with the drive volumes unlocked. If you are using QBX which knows nothing about long file names, you must install it with the volumes LOCKED if you want to perform commands like the prior example. It's working just fine now after that correction.
John