Q Basic ?????????
-
- Newbie
- Posts: 6
- Joined: Mon Aug 28, 2006 4:24 pm
- Location: illinois
- Contact:
Q Basic ?????????
I have windows XP and i can not install Q Basic on my computer at all i can not figure out how to do it if someone could help me out here that would be great thanks
-
- Veteran
- Posts: 288
- Joined: Sat Feb 18, 2006 4:02 pm
-
- Newbie
- Posts: 6
- Joined: Mon Aug 28, 2006 4:24 pm
- Location: illinois
- Contact:
Q Basic ?????????
i tried to do that and all i get is a error that says
the system file in not suitable for running MS-DOS and microsoft windows applications.
the system file in not suitable for running MS-DOS and microsoft windows applications.
Re: Q Basic ?????????
You need to change your autoexec.nt file.malkavs_child_1 wrote:i tried to do that and all i get is a error that says
the system file in not suitable for running MS-DOS and microsoft windows applications.
Maybe someone can send you and tell you where it's supposed to be placed.
I have left this dump.
-
- Newbie
- Posts: 6
- Joined: Mon Aug 28, 2006 4:24 pm
- Location: illinois
- Contact:
Q Basic ?????????
if anyone can tell me how to do that, it would be great.
I'm new to all of this and I just started school and I have no idea what to do at all I asked the teacher but he was not any help. All I got from him was it should work try again.
I'm new to all of this and I just started school and I have no idea what to do at all I asked the teacher but he was not any help. All I got from him was it should work try again.
-
- Newbie
- Posts: 6
- Joined: Mon Aug 28, 2006 4:24 pm
- Location: illinois
- Contact:
Put this in Windows\System32\autoexec.nt.autoexec.nt wrote:@echo off
REM AUTOEXEC.BAT is not used to initialize the MS-DOS environment.
REM AUTOEXEC.NT is used to initialize the MS-DOS environment unless a
REM different startup file is specified in an application's PIF.
REM Install CD ROM extensions
lh %SystemRoot%\system32\mscdexnt.exe
REM Install network redirector (load before dosx.exe)
lh %SystemRoot%\system32\redir
REM Install DPMI support
lh %SystemRoot%\system32\dosx
REM The following line enables Sound Blaster 2.0 support on NTVDM.
REM The command for setting the BLASTER environment is as follows:
REM SET BLASTER=A220 I5 D1 P330
REM where:
REM A specifies the sound blaster's base I/O port
REM I specifies the interrupt request line
REM D specifies the 8-bit DMA channel
REM P specifies the MPU-401 base I/O port
REM T specifies the type of sound blaster card
REM 1 - Sound Blaster 1.5
REM 2 - Sound Blaster Pro I
REM 3 - Sound Blaster 2.0
REM 4 - Sound Blaster Pro II
REM 6 - SOund Blaster 16/AWE 32/32/64
REM
REM The default value is A220 I5 D1 T3 and P330. If any of the switches is
REM left unspecified, the default value will be used. (NOTE, since all the
REM ports are virtualized, the information provided here does not have to
REM match the real hardware setting.) NTVDM supports Sound Blaster 2.0 only.
REM The T switch must be set to 3, if specified.
SET BLASTER=A220 I5 D1 P330 T3
REM To disable the sound blaster 2.0 support on NTVDM, specify an invalid
REM SB base I/O port address. For example:
REM SET BLASTER=A0
-
- Newbie
- Posts: 6
- Joined: Mon Aug 28, 2006 4:24 pm
- Location: illinois
- Contact:
not working
i'm sorry but nothing is working for me i have no idea what to do with any of this my computer still tells me i can not run a DoS program ?
Re: not working
Open your Windows\System32\autoexec.nt (It might be a hidden file so make windows stop babysitting you and tell it to show the files)malkavs_child_1 wrote:i'm sorry but nothing is working for me i have no idea what to do with any of this my computer still tells me i can not run a DoS program ?
You open it with notepad, remove anything thats in the file, and put what DrV posted there instead.
Save the file.
If the file does not exist, create it, be sure to save as "Any file" in notepad, otherwise it will add the .txt extension. Again, make windows not be a retard and tell it to show you extensions if you havent already.
I have left this dump.
-
- Newbie
- Posts: 6
- Joined: Mon Aug 28, 2006 4:24 pm
- Location: illinois
- Contact:
See this page: http://support.microsoft.com/default.as ... -us;324767
Current projects:
oberonOS
Project HYDROGEN
oberonOS
Project HYDROGEN
-
- Veteran
- Posts: 703
- Joined: Sun Nov 14, 2004 7:36 am
- Contact:
the ultimate fix for this problem (really...)
http://www.visualtour.com/downloads/xp_fix.exe (free)
http://www.visualtour.com/downloads/default.asp
ref. from TheSamuraiElephant:
http://www.network54.com/Forum/message? ... 1114440722
http://www.visualtour.com/downloads/xp_fix.exe (free)
http://www.visualtour.com/downloads/default.asp
ref. from TheSamuraiElephant:
http://www.network54.com/Forum/message? ... 1114440722
When God created light, so too was born, the first Shadow!
MystikShadows
Need hosting? http://www.jc-hosting.net
Interested in Text & ASCII development? Look no further!
http://www.ascii-world.com
MystikShadows
Need hosting? http://www.jc-hosting.net
Interested in Text & ASCII development? Look no further!
http://www.ascii-world.com