If you have questions about any aspect of QBasic programming, or would like to help fellow programmers solve their problems, check out this board!
Moderators: Pete , Mods
Killer
Newbie
Posts: 8 Joined: Sun Oct 10, 2004 7:07 am
Post
by Killer » Mon Oct 11, 2004 3:00 pm
Well i have downloaded the compiler thingy but when i click make.exe it says enter spec now whats that?????
=D
Z!re
Veteran
Posts: 887 Joined: Wed Aug 04, 2004 11:15 am
Post
by Z!re » Mon Oct 11, 2004 3:06 pm
If using Qbasic 45, or PDS 71,then just click:
Run->Make EXE file
Make sure it's set to: Stand-Alone EXE
Click: Make EXE
The EXE file will be located in your current DOS path, that is: the same as QB, unless you've changed it.
I have left this dump.
Killer
Newbie
Posts: 8 Joined: Sun Oct 10, 2004 7:07 am
Post
by Killer » Mon Oct 11, 2004 3:22 pm
ye thats what i go to do and it says enter spech and i dont no what that is[/img]
=D
potato
Newbie
Posts: 6 Joined: Mon Oct 11, 2004 11:44 am
Post
by potato » Mon Oct 11, 2004 3:34 pm
you're not using a file called "make.exe" are you?
there's a RUN menu from within the IDE, and one of the options
in that menu is "MAKE EXE"
Killer
Newbie
Posts: 8 Joined: Sun Oct 10, 2004 7:07 am
Post
by Killer » Mon Oct 11, 2004 3:49 pm
no i am i think , can i post screenys up anyway it says
link: warning L4051: BCL7OEFR.LIB cannot fide libary
Enter new spech file: _
=D
Killer
Newbie
Posts: 8 Joined: Sun Oct 10, 2004 7:07 am
Post
by Killer » Mon Oct 11, 2004 3:52 pm
i think i need to make a .LIB file as it has lost mine or it dosent work so how can i make 1
=D
Z!re
Veteran
Posts: 887 Joined: Wed Aug 04, 2004 11:15 am
Post
by Z!re » Tue Oct 12, 2004 5:18 am
When it says enter spech:
Just type in the path to your QB folder, for example:
d:\qbasic71\
Which is where my BCL7OEFR.LIB is located.
You could also go to: Options->Set Paths
And make sure thoose are set correctly, though, it doesent work for me, i still have to specify d:\qbasic71\ each time..
Remeber to include the last \, or you'll have to type out the libname: BCL7OEFR.LIB... which is a bit annoying, as you only need to type the path.
To type a backslash \, in the QB IDE, hold ALT GR, and press 92, let go of ALT GR..
I have left this dump.
Digital Shadow
Coder
Posts: 23 Joined: Sun Oct 03, 2004 10:26 pm
Location: Prince George, BC, Canada
Post
by Digital Shadow » Tue Oct 12, 2004 4:04 pm
whoa there.... save yourself a world of trouble and use qbasic 4.5, in my opinion many times easier and all round good than 7.1
get it at
http://www.icarusindie.com/programming/ ... s/qb45.zip
People laugh at me because I'm different, I laugh because there all the same... Soooo, if were all laughing, I fail to see the problem
Z!re
Veteran
Posts: 887 Joined: Wed Aug 04, 2004 11:15 am
Post
by Z!re » Tue Oct 12, 2004 4:51 pm
DigiShad, it's the same you know...
QB45, QB71, doesent matter...
I use 71, never had any problems with it... I used 45 before.. but stopped simply because it can't handle as much data and code as 71.
I have left this dump.
Digital Shadow
Coder
Posts: 23 Joined: Sun Oct 03, 2004 10:26 pm
Location: Prince George, BC, Canada
Post
by Digital Shadow » Wed Oct 13, 2004 2:06 pm
no kidding, I had trouble with it, but mabee I'll try it out again, then I can manage to avoid that "out of memory" error in my 3D stuff....
People laugh at me because I'm different, I laugh because there all the same... Soooo, if were all laughing, I fail to see the problem
Z!re
Veteran
Posts: 887 Joined: Wed Aug 04, 2004 11:15 am
Post
by Z!re » Wed Oct 13, 2004 4:53 pm
Or you could try to compile from the commandline, saves LOADS of memory.. the QB IDE is a memory hog... really...
I have left this dump.
Guest
Post
by Guest » Thu Oct 14, 2004 1:41 pm
I should, that was without compiling tho. I'll end up compiling from the prompt to run my progs if I need that, but I can support arround 40000 vertecies before it oopses