Some random QB error...Conspiracy?
- Mitth'raw'nuruodo
- Veteran
- Posts: 839
- Joined: Sat Jan 22, 2005 11:04 am
- Location: Eastern Coast of US
- Contact:
Some random QB error...Conspiracy?
Ok, So I've had this prob:
I made my program and ran it, it was fine....I go back to it an hour later and run it CHANGING NOTHING and I get this error (the whole QB exits out and gives me this error, look below).
So then I go back and save it to another file and try running that, SAME THING happened...
I then made everything a REM in my first one then ran it....It ran...well sort of (a bunch of REMs don't do much now do they heh )....I then take that and make them not REMs anymore and guess what IT WORKS!
So I then tried the other one...It didn't work!
So I compared them and the ARE IDENTICAL!
Why Is one now running while the other hates me?
Error:
window appears:
Bar at top: 16 bit MS-DOS Subsystem
In box:
---Microsoft QuickBASIC
---The NTVDM CPU has encountered an illegal instruction.
---CS:07f4 IP:1dbd OP:fe 30 06 8b 46 Choose 'Close' to terminate the application.
Buttons:
------Close------Ignore
Well that's all I know anyone have a guess?
I made my program and ran it, it was fine....I go back to it an hour later and run it CHANGING NOTHING and I get this error (the whole QB exits out and gives me this error, look below).
So then I go back and save it to another file and try running that, SAME THING happened...
I then made everything a REM in my first one then ran it....It ran...well sort of (a bunch of REMs don't do much now do they heh )....I then take that and make them not REMs anymore and guess what IT WORKS!
So I then tried the other one...It didn't work!
So I compared them and the ARE IDENTICAL!
Why Is one now running while the other hates me?
Error:
window appears:
Bar at top: 16 bit MS-DOS Subsystem
In box:
---Microsoft QuickBASIC
---The NTVDM CPU has encountered an illegal instruction.
---CS:07f4 IP:1dbd OP:fe 30 06 8b 46 Choose 'Close' to terminate the application.
Buttons:
------Close------Ignore
Well that's all I know anyone have a guess?
"But...It was so beutifully done"
- Mitth'raw'nuruodo
- Veteran
- Posts: 839
- Joined: Sat Jan 22, 2005 11:04 am
- Location: Eastern Coast of US
- Contact:
-
- Veteran
- Posts: 1055
- Joined: Sun Jan 02, 2005 2:11 pm
- Location: At my computer
- Contact:
Hay, Mitth, you loading external gfx files with BSAVE BLOAD?, cause I was once getting the same message when I was doing that, thanks to Nek (Thank you very much!!) I don't get it any more..
If you are using that, Go down and look at the "BSAVE, BLOAD?" thread it has the correct code, if not, then I'm of no help in ASM stuff,.. yet,..
If you are using that, Go down and look at the "BSAVE, BLOAD?" thread it has the correct code, if not, then I'm of no help in ASM stuff,.. yet,..
-Kevin (aka:Rattra)
(x.t.r.GRAPHICS)
(x.t.r.GRAPHICS)
- Mitth'raw'nuruodo
- Veteran
- Posts: 839
- Joined: Sat Jan 22, 2005 11:04 am
- Location: Eastern Coast of US
- Contact:
I am using the mouse and I never touched that Z!re...
And ya I should be getting the same error or not but 1 has it while the other doesn't and they are the SAME!
And no BSave/load for me either....
Ran...success....I didn't change ANYTHING, ran it again...it failed...rebooted....tryed it again...failed....tried other progs....success....tried it again....failed....tried the copy.....failed....made the original a bunch of REMs....success....undid the REMs....success....tried the copy....failed.....Mit confused..... ....Mit types this thread in confusion....
So that's what my mind thought....
And ya I should be getting the same error or not but 1 has it while the other doesn't and they are the SAME!
And no BSave/load for me either....
Ran...success....I didn't change ANYTHING, ran it again...it failed...rebooted....tryed it again...failed....tried other progs....success....tried it again....failed....tried the copy.....failed....made the original a bunch of REMs....success....undid the REMs....success....tried the copy....failed.....Mit confused..... ....Mit types this thread in confusion....
So that's what my mind thought....
"But...It was so beutifully done"
-
- Veteran
- Posts: 1055
- Joined: Sun Jan 02, 2005 2:11 pm
- Location: At my computer
- Contact:
Hmm, its something, keep looking,. it did it once to me,..
DO --Run--works--stop--run again--fail--reboot--run again--works-- LOOP
But mine was my BSAVE BLOAD, ohwell, its a prob, just got to find it.. wait, are you using that SuperPut or something?? You might have messed up a line while pasting..
Did you use a .TXT file to move it into QB, or that Edit/Paste thing on the windows tool bar?? .TXT is more solid and won't mess up any of the code.
Just copy every thing into a .TXT, and move it to you QB folder, or where you QB games are loaded from,. Then in QB, back out "*.BAS" and put "*.TXT"..
It loads every thing in, then you can save it as .BAS format and edit it.
DO --Run--works--stop--run again--fail--reboot--run again--works-- LOOP
But mine was my BSAVE BLOAD, ohwell, its a prob, just got to find it.. wait, are you using that SuperPut or something?? You might have messed up a line while pasting..
Did you use a .TXT file to move it into QB, or that Edit/Paste thing on the windows tool bar?? .TXT is more solid and won't mess up any of the code.
Just copy every thing into a .TXT, and move it to you QB folder, or where you QB games are loaded from,. Then in QB, back out "*.BAS" and put "*.TXT"..
It loads every thing in, then you can save it as .BAS format and edit it.
-Kevin (aka:Rattra)
(x.t.r.GRAPHICS)
(x.t.r.GRAPHICS)
- Mitth'raw'nuruodo
- Veteran
- Posts: 839
- Joined: Sat Jan 22, 2005 11:04 am
- Location: Eastern Coast of US
- Contact:
-
- Veteran
- Posts: 1055
- Joined: Sun Jan 02, 2005 2:11 pm
- Location: At my computer
- Contact:
-
- Veteran
- Posts: 1055
- Joined: Sun Jan 02, 2005 2:11 pm
- Location: At my computer
- Contact:
- Mitth'raw'nuruodo
- Veteran
- Posts: 839
- Joined: Sat Jan 22, 2005 11:04 am
- Location: Eastern Coast of US
- Contact:
That's ok Z!re I was a little short to.....
But I didn't make QB's QB.BI so even if it does use the VarSeg thing it wouldn't be the problem because I haven't had a peep out of that since I first used it....
I'm on QB4.5.
Umm...There's nothing different between the one that works and the one that doesn't...I know that's impossible but I go with facts here....
BTW accually the one that works IS different now because I just put the SuperPut in it AND I LOVE IT! Thanks Z!re on that....I'm also making the HUD routines now....
I still gotta work on my seeking missle algo though.....hmmm....
But I didn't make QB's QB.BI so even if it does use the VarSeg thing it wouldn't be the problem because I haven't had a peep out of that since I first used it....
I'm on QB4.5.
Umm...There's nothing different between the one that works and the one that doesn't...I know that's impossible but I go with facts here....
BTW accually the one that works IS different now because I just put the SuperPut in it AND I LOVE IT! Thanks Z!re on that....I'm also making the HUD routines now....
I still gotta work on my seeking missle algo though.....hmmm....
"But...It was so beutifully done"